|
Tucked snugly in the
choir loft is the
console for the organ. Like most other parts of this
organ, the
console undoubtedly is on its second or third assignment. |
|
Here we see a view of
the manuals, couplers, and thumb pistons (buttons
under the keys). Also note the lights on the right side for crescendo
(a single light instead of a row of lights), sforzando, and wind to
indicate the blower is on. Finally, we see the name plates for the
console builder Schantz, and the installer of the organ
Peebles-Herzog. |
|
Here's a look at the
draw knobs for the
Pedal and Swell Divisions. Despite there being 11 draw knobs for the
Pedal Division, there are actually only two physical ranks of pipes.
The rest are extensions of ranks in other divisions, or
borrowing from other ranks.
The switch at the bottom turns is the on/off switch for
the blower and console. |
|
The Great Division
side of the console
is fairly simple. Note the switch at the bottom which controls the
strike pressure of the chime hammers. The chimes are a product of the
Mayland Chime Company of Lakeville, CT. |
|
Shown here are the six
toe studs which
can be programmed by the organist to create preset registrations. The
rounded pointy shape of these toe studs are different from the other
organs profiled on these pages. |
|
The right side has
five pedal toe studs, plus
three couplers. Again, the shape of the couplers is different than any
others seen from the other organs profiled. |
|
Finally, between the
toe studs are the swell
and crescendo pedals. Pressing the crescendo pedal completely will
result in the sforzando light to illuminate indicating full organ from
the manuals. |